Hi, Thank you for contacting Fixya. This error is detected when one of the followings occurs: The scanner performs retry operation. The document may have slipped on the rollers Check the followings:
At this point you should have the Paper separation pad 1 pickup roller removed.
If not, return to the previous step for instructions on removing the pickup roller. Next the plastic piece circled in red below needs to be unclipped.
Some of the older LaserJet 's do not unclip, see the second picture. The picture below is of a LaserJet which is easier to photograph, but uses mostly the same parts.
The unclipping procedure is the same on a LaserJet and newer revisions of the LaserJet Simply pull up at the three points circled in yellow where the plastic piece snaps onto the shaft. For older revisions of the LaserJet the plastic piece pictured above does not unclip. You need to bend the plastic up in order to slide the two black discs to the left.
You need to use a little muscle to lift the plastic up, but it's the only way to slide the two discs to the left. Now you can get at the separation pad.
The next step is to actually replace the separation pad. The following picture shows the two styles of separation pads that are available: But if you have the new style assembly in your printer, you can just swap the grey pads. The next few pictures will show you how to do it both ways. If the current separation pad you have installed in your machine is the "old style", you will need to replace the entire separation pad assembly.
To remove the old assembly simply take a small flat head screwdriver and pop out the plastic arms circled in the picture below. This will free the separation pad. Remove it and save the springs. You will reuse the springs on the new separation pad assembly.
Or, if you have the New Style Separation Pad: First use a flatblade screwdriver to pry your old grey pad free. Pry the same grey pad free from the new separation pad assembly. You will install the pad only.
Insert the new grey pad teeth of the pad pointing down and lock it down firmly onto the black plastic assembly. Once the new separation pad is installed, you can proceed to install the pickup roller. Slide one of the black disks all the way to the right, then install the pickup roller.
Slide the second black disc all the way back to the right, and follow the reverse procedures to re-assemble everything.The Krag Rifle As used by US Forces circa Spanish American War. This page is provided for those aficionados of Theodore Roosevelt who are interested in the arms issued to and used by US forces and the Rough Riders during the Spanish American War.
urbanagricultureinitiative.com: HP LASERJET PAPER JAM REPAIR KIT ROLLER SEPARATION PAD PREMIUM: Electronics. Or, if you have the New Style Separation Pad: (on the newer LaserJet series and the series) If you have the "new style" separation pad assembly in your .
Fulfillment by Amazon (FBA) is a service we offer sellers that lets them store their products in Amazon's fulfillment centers, and we directly pack, ship, and provide customer service for these products.
Paper Feed Components HP LaserJet Pro Mn Separation Pad Holder Assembly - Genuine HP Part - Tray 2 (Cassette) / Tray 3 (Optional Sheet Tray) NOT used in tray 2 (Cassette) for Laserjet Pro /MFP and M (See PR # E) In Stock - Ships Today!Brand: HP. hp laserjet paper jam repair kit roller separation pad premium.