Heat exchanger

A value is needed for the overall heat transfer coefficient for the given heat exchanger, fluids, and temperatures.

Heat exchanger

Back to List What is a Heat Exchanger? A heat exchanger is a device designed to efficiently transfer or "exchange" heat from one matter to another. When a fluid is used to transfer heat, the fluid could be a liquid, such as water or oil, or could be moving air.

The most well known type of heat exchanger is a car radiator. In a radiator, a solution of water and ethylene glycol, also known as antifreeze, transfers heat from the engine to the radiator and then from the radiator to the ambient air flowing through it.

There are various types of heat exchangers. With air-to-liquid cooling, heat is transferred from the air to a liquid. One example of air-to-liquid cooling is cabinet cooling. With liquid-to-air cooling, the heat is transferred from the liquid to the air.

This type of cooling is generally used to cool process fluids. Liquid-to-liquid cooling is also used to cool process fluids, but the heat is removed by another liquid instead of by air. Lastly, with air-to-air cooling, heat is transferred from one air or gas stream to another.

Heat Exchanger Tube and Fin Lytron has been manufacturing one of the most widely used heat exchanger technologies, tube and fin heat exchangersfor more than 20 years.

Tube and fin heat exchangers provide air-to-liquid cooling or liquid-to-air cooling. They consist of fin, hairpin tubes, return bends to connect the hairpins, a tube sheet to support and properly align the tubes, a header with inlets and outlets, side plates for structural support, and usually a fan plate.

The tubes provide the path for the liquid coolant, and the fin adds surface area for more heat convection. Copper is often selected for tube and fin material due to its excellent thermal conductivity and compatibility with water and ethylene glycol solutions.

The surface area of the flat tubes is also much greater than the surface area of the tubes in a tube and fin heat exchanger.

Heat exchanger

The additional surface area of the tubes in an oil cooler flat tube heat exchanger maximizes heat transfer when poor heat transfer fluids like oil or ethylene glycol are used.

These oil cooler heat exchangers consist of fin, flat tubes, a welded header with inlets and outlets, and plates, including an optional fan plate. Another type of heat exchanger is a plate-fin heat exchangerwhich can provide air-to-air, air-to-liquid, liquid-to-air, or liquid-to-liquid cooling.

Plate-fin heat exchangers consist of finned chambers separated by flat plates and are circuited in alternating hot and cold fluid passages.

Heat exchanger

Heat is transferred via fins in the passageways, through the separator plate, and into the cold fluid via the separator plate, and into the cold fluid via fin once again. The heat exchanger also has manifold ducting, mounting brackets, and a frame.

This forms separate flow channels for two liquid streams so that the two fluids are never in direct contact. The heat exchanger plates are brazed together at the edges and at a matrix of contact points between sheets. The liquid-to-liquid heat exchanger can be compared to a shell and tube heat exchanger, which is used in similar applications.Shop huge inventory of Water to Air Heat Exchanger, Plate Heat Exchanger, Water Heat Exchanger and more in Heat Exchangers on eBay.

Find great deals and get free shipping. For over 20 years Heat-Exchanger USA has been designing and fabricating new shell & tube heat exchangers, as well as direct replacement and duplicate heat exchangers.

Heat-Exchanger USA designs and builds all its Heat Exchangers to ASME Section VIII, Division 1 requirements, as well as per TEMA B, C, & R standards.

Introduction. The heat exchanger design equation can be used to calculate the required heat transfer surface area for a variety of specified fluids, inlet and outlet temperatures and types and configurations of heat exchangers, including counterflow or parallel flow.

For over 20 years Heat-Exchanger USA has been designing and fabricating new shell & tube heat exchangers, as well as direct replacement and duplicate heat exchangers. What is a Heat Exchanger? A heat exchanger is a device designed to efficiently transfer or "exchange" heat from one matter to another.

When a fluid is used to transfer heat, the fluid could be a liquid, such as water or oil, or could be moving air. Product Description This unit is a Water to Air Heat Exchanger for use in your hot air.

Heat exchanger - Wikipedia